More details for Glass with LCD Vacuum laminating via Vacuum laminator machine
The Vacuum laminating machine is the most important machine in the completely process of smart phone reparing.Because it can not finished by hand and even a little details can affect the result.By the way,if there are too much bubble inside.So that the bubble remover can not remove the bubble.
There are some details as below that you have take care:
When you clean the glass cover and the LCD, you should make sure that the surface is clean and the without any dust.
When you put the glass cover into the mound , make sure the glass cover and the LCD in the right location;
When you take out the LCD and the glass cover from the mould, Please don't press the glass cover and the LCD. Just touch glass cover in the middle.
When you put the glass cover and the LCD in the workbench of vacuum laminatin machine.
Please make sure the flex cable under the mat.
5. Press the start button at the same time to start the machine. Please don't set any parameter because our engineer have set the parameter before we sent the machine out.
Touch Time Tech Group have tested so many times to make sure all the parameter is the best.
Home > News > More details for Glass with LCD Vacuum laminating via Vacuum laminator machine
