How to wipe off the glue before use vacuum laminating machine?
Today we are going to learn how to wipe off the glue of screen effective, because before we use vacuum laminating machine, we need to clean screen first, there are some skills for your reference.
1, usually we need clear screen clean cloth, single head blade, 8333 glue, or 530 white electric oil such as cleaners.
2, if we need to change the polarization, we need to use glue, because itself in addition to the glue is have the effect of softening colloid, as the original glue at the bottom of the polarized light is very dry and hard, we'll soften the glue, and then use the blade shave (note to avoid glue into the backlight), when most of the colloid is clean, we use the detergent for cleaning (cleaners have volatile).
3,usually a lot of people always can not clean screen thorough, because they are in the back and forth to wipe the screen, the best method it's from one side to wipe the screen.
4, why screen appears white dots? Appear white dots that is because of the screen caused by aging, aging is because we use too much thinner to clean, or former some water caused by glue.We usually as long as the touch can be replaced, or use some shaving blade can shave.
In the use ofvacuum laminating machine Detail is actually more important, detail decides success or failure, more joint information can focus on Touch Times.
Home > News > How to wipe off the glue before use vacuum laminating machine?
