Home > News > How to separate the middle frame for Samsung

How to separate the middle frame for Samsung

This is the process of how to separate the middle frame for Samsung
 
1, please put the broken part on the hot plate to heatup .Usually the temperature is 90 degree and make sure that the positive side of the broken part ( the up side ) has higher temperature as well ,which means the heat has through out the whole broken part .

2, During this process , you can put the liquid ( the glue remover liquid or kind of industrial alcohol ) in the holes and so do the slots ,make sure the liquid Soaked in the whole lcd .

3, After the upper side has enough heat ,use a tool ,like the swab to pry the middle frame from the lcd via the holes by using a little strength .

4, And then use your thumb finger nail to open a small mouth between the lcd and the middle frame .And then use the swab to continue separating them .

5, If you find that it is hard to do separation , you can use some more liquid or put it on the heat plate again .Once you see the adhesive between the middle frame and the lcd , you can use a small blade to cut off the adhesive and pull it out . (If you do not have long finger nails , you can use some sharp plastic tool or name card will be ok as well .

Any Questions Please do not Hesitate to Contact us