Home > Vacuum OCA Laminating Machine
  |
Name
：100% No Bubbles 2 in 1 GM998 LCD OCA Vacuum Laminating Air Bubble Removing Machine for LCD Refurbish
Price
： $1180
Model
： GM988
Size
： 420 x 350 x 330 mm
Material
： 2 in 1 LCD Refurbish machine for Max 12inch
Colors
： Black and White
|
Application:
Equipment Technical Parameters:
Power: AC220V 800W / AC110V,AC220V Selective
Work Environment: 20-30℃, clean and dust-free
Laminating: Flat Type Lamination
Heating Method: Constant temperature
Applicable Size: Max 12'
Weight of Equipment: About 30.2kg
1. Easy to use, English and Chinese models can be choosed;
2. No need a Vacuum pump or Air Compressor;
3. No need bubble remover box;
4. Best quality;
5. Widely used for mobile phone LCD Refurbishing;
6. Pressing force uniform, no bubbles.
1. Plug in power line, turn on the power switch.
2. Adjust laminating pressure to 0.5Mpa.
3. Touch system start, Click "Setting".
4. Set the "Vacuum time" to 15seconds, "Laminating time" 25seconds, "Debubble time" 5-10Mins, " laminating debubble temp" 40 degree Celsius, Click "Confirm"
5. Open the machine cover lid, tear off the oca protect film.
6. Put the glass on LCD, Then USE one finger click the middle screen softly.
7. Put it to laminating area in order, close the cover lid, tighten the screws.
8. Click "Automatic", press the start button, vacuum air- removed start, tighten the screws again.
9. It will turn to bubble remove mode after 25 seconds automaticly, it will automati exhaust after debubble.
10. Loosen the screws, take out the screen.
Packaging Detail:
