Home > LCD/Frame Separator

Main Features:

1. Enough heating metal plate: for mobile phone universal ;

2. Built-in Vacuum Pump, low noise,no need fixture screws or outside heavy connect any more.

3. Safety power system inside,avoiding the electric leakage problem;

4. Anti static body material,prevent the LCD and the flex cable being damaged from the static;

5. Easy to operate,automatic separating;  

6. Smooth metal plate to hold the touch screen without any damaged;

7. Power supply: AC 85V to AC 265V 50Hz ,almost for users from all over the world;

8. Temperature should be set to 80 centigrade to 100 centigrade,when you do the job on iPhone and galaxy series ect;

9. Compatible for LCD or LED screen assembly;

10. Safety power system to avoid leakage.

Operating:

1. Install the wire on the machinebar.Keep the wire and the mould even;

2. Put your lcd with touch screen on the metal plate, lcd side above;

3. Turn on the machine and wait for the metal plate become 80-100 degree;

4. Start to push the mould gently and slowly until the lcd automatically seperated from the glass. (If the glass is totally broken,please stick a tape on the surface of the glass to make it easy to separate and avoid it hurt the lcd.), generally just one time you can take the glass off;

5. Finally you will find yourself do a good job; now start to get a well pay business!

Note:

1. Must ensure the machine connects ground wire

2. Do not let air flow blows on the plate directly,or it will affect the heating machine.

Any Questions Please do not Hesitate to Contact us~